• 917-687-9550
  • admin@inventorygain.com
    • Inserts


      CCMT060204-C25 GRADE NC3120 ...

      $30.05        $60.00
        

      Description

      Inserts

      Insert and a Tool Holder - A Cost Effective Machining Approach


      An indexible insert will have many cutting edges, when a cutting edge is worn off another edge is indexed in the tool holder until all cutting edges are used up.
      Insert is not intended to be reground, however its far cheaper than braxed Carbide tools and Grinding costs are simultaneously eliminated.
      Negative rake inserts are further cost advantageous than positive rake inserts as they have many sides.
      To give a finishing touch to the metal pieces.
      For cutoff or parting of the metals.


      The Applications Of the Inserts


      It cuts through harder and tougher metals.

      They are temperature tolerant or withstands high temperature during cutting.

      The Insert tools can be easily set-up and can be changed to another edge after usage.

      It has higher tolerances to wear and tear.

      It gives a better surface finish quality.


      The Advantages Of the Inserts


      For cutoff or parting of the metals.

      To give a finishing touch to the metal pieces.

      It is used in threading of Screws and bolts.

      The inserts are also used to remove scrap material from the work piece by giving a desired style.

      The inserts are also used to remove scrap material from the work piece by giving a desired style.It is used in threading of Screws and bolts.